simultaneous interpretation

Barinas simultaneous interpretation equipment for sale and rent

For all your simultaneous interpretation needs




Translations Rentals Sales


Digital simultaneous interpreter consoles

TC-F06/16 - 16-channel interpretation console with automatic channel interlocking function and built-in loudspeaker

The TC-F06 interpreter console is a 6-channel, digitally-controlled workstation which can be configured to provide each interpreter an individual consoles or shared by two interpreters. It handles simultaneous interpretation for up to 6 different languages.

Features of interest to interpreters:

Either gooseneck microphone or headset microphone can be used
Built-in loudspeaker with volume level control
LCD screen for specific information display
3 incoming languages can be preset, with pre-select A/B/C keys.
Automatic channel interlocking prevents interpreters from using same outgoing channel
Relay interpretation allows the interpreters to work from an active channel other than the floor
MUTE key to enable a brief muting of the microphone for cough cut
SLOW key to alert the current speaker to speak slowly

Technical specifications:
3.5mm jacks on both sides for MIC input and headphone/recording output
Loudspeaker is automatically switched off when MIC is on or headset is used
The floor signal goes to each output channel after the microphone is switched off
Multiple interpreter consoles can be connected in a daisy-chain
Designed to comply with all related international standards & requirements.
Frequency response: 50-18kHz
Distortion at 1 kHz: < 0.1%
Channel separation: > 85 dB
Signal-to-noise ratio: > 90 dB
Max. input power level: 7.5V
Operating voltage: 24V
Power consumption: 2.5W
8Ω/2W built-in loudspeaker
Operating temperature: 0?-50?
Standard mic stem length: 425 mm
128x64 backlit LCD screen
3/5/10m cable with DB25 connectors
3.5mm jacks for mic, headphone, recorder
ABS base: 247 X 145 X 95mm

More information

Bosch LBB 3520/10 Interpreter Desk with LCD Screen: 15-Channel Interpreter Desk

Interpreter desk for 15 languages


  • Accommodates up to 15 languages including the floor language
  • Pre-select keys for language selection
  • ‘Quality indication’ of incoming languages
  • Backlit LCD screen for clearer information display
  • Improved ergonomic design to simplify operation
32-channel, single user Bosch DCN-IDESK interpreter desk

Bosch interpreter desk I-DeskThe DCN-IDESK is a single-user interpreter desk with a stylish and modern design, which fully conforms to internationally agreed standards. Clear positioning per functional area of the desk controls allows intuitive operation without mistakes.

TC-F906 Digital Interpreter Console

interpreter consoleThe TC-F906 interpreter console is a digitally-controlled workstation for two interpreters to work in turn.

Interpreters may quickly switch between the floor language and the channel set. An automatic channel interlocking function prevents them from using the same output channel. The auto relay function enables them to work from an active channel other than the floor, and to provide relay interpretation in case they are unfamiliar with the floor language and unable to interpret it. Pressing the COUGH CUT button enables a brief muting of the microphone. Automatic acoustic feedback prevention is ensured when the interpreters listen to their own interpretation.

  • Control panel for two interpreters
  • Single-cable daisy chain interconnection
  • Automatic channel interlocking
  • Automatic relay interpretation
  • Monitor switch for active channel selection
  • A, B outgoing channel selection
  • Channel selectors with LED indicators
  • Microphone on/off and volume control
  • COUGH CUT for muting microphone
  • Automatic acoustic feedback prevention
  • 3.5mm jacks for MIC, headphone & recorder
  • Frequency response: 100Hz-15kHz
  • Distortion at 1 kHz: <1%
  • Channel separation: >70Db
  • S/N ratio: >70 dB
  • Max. input power level: 7.5V
  • Input impedance: 2k ohms
  • Operating voltage: 24V
  • Power consumption: 19W
  • Dimension: 330 × 200 × 40 mm (W×D×H)
  • Weight: 2.7 kg
1 VOLUME Rotary switch for headphone volume level control
2 MONITOR Rotary switch for selection of an active channel for relay interpretation
3 ORIGINAL Pushbutton for the floor (original) language channel (CH0). Push the button to access the floor signal.
4 RELAY Pushbutton for the relay interpretation which allows the interpreters to work from an active channel other than the floor.
5 MICROPHONE OUTPUT CHANNEL SELECTORS Push a button to select an audio output channel. When a channel is occupied, the LED indicator above the button will light up.
6 MIC ON/OFF Push the button to activate the microphone. Press again to switch off the microphone.
7 COUGH CUT The indicator will light up when the button is pressed to enable a brief muting of the microphone
interpreter console
8 REC Output jack (3.5mm) to connect an audio recorder.
9 MIC Microphone input jack (3.5mm).
10 PHONES Headphone output jack (3.5mm).
11 INPUT Male DB25 port to connect the transmitter or the last interpreter console’s OUTPUT port.
12 OUTPUT Female DB25 port to connect next interpreter console’s INPUT port.


MasterCard Visa American Express Discover  
Free shipping on equipment purchases over $100