16-channel digital DSSS 2.4 GHz simultaneous interpretation systems

TC-RF16 - 16-channel, 2.4 GHz DSSS simultaneous interpretation system

TC-RF1A-4 DSSS 4-channel digital transmitter The TC-RF16 digital DSSS simultaneous interpretation system transmits on the worldwide license-free 2.4 GHz frequency band and incorporates state-of-the-art Direct Sequence Spread Spectrum (DSSS) technology to deliver CD quality sound, provide excellent immunity from both noise and interference, and insure high security against unauthorized listening.

The system offers distortion-free wireless solution for simultaneous interpretation and language distribution in 16 audio channels, with working range of 50 to 200 meters, ideally suited for use in business and government conferences, international conventions and other multilingual applications. This system is available in 2, 4, 6, 8, 10, 12 and 16 channels.

Interpreter Console

The TC-F16 interpreter console is a digitally-controlled workstation allowing two interpreters to work in turn.

Handles simultaneous interpretation for up to 16 different languages.

Gooseneck microphone and headset microphone can be used

Built-in loudspeaker with volume level control

LCD screen for specific information display

3.5mm jacks on both sides for MIC input and headphone/recording output

3 incoming languages can be preset, with pre-select A/B/C keys.

Automatic channel interlocking prevents interpreters from using same outgoing channel

Relay interpretation allows the interpreters to work from an active channel other than the floor

MUTE key to enable a brief muting of the microphone for cough cut

SLOW key to alert the current speaker to speak slowly

Loudspeaker is automatically switched off when MIC is on or headset is used

The floor signal automatically goes to the output channel after the microphone is turned off

Multiple interpreter consoles can be connected in a daisy-chain

Designed to comply with all related international standards & requirements.

Frequency response: 50-18kHz

Distortion at 1 kHz: < 0.1%

Channel separation: > 85 dB

Signal-to-noise ratio: > 90 dB

Max. input power level: 7.5V

Operating voltage: 24V

Power consumption: 2.5W

8ý/2W built-in loudspeaker

Operating temperature: 0Åé-50Åé

Standard mic stem length: 425 mm

128x64 backlit LCD screen

3/5/10m cable with DB25 connectors

3.5mm jacks for mic, headphone, recorder

ABS base: 247 X 145 X 95mm

Digital Control Unit

The microprocessor based TC-RFZ04 digital control unit is able to transmit 4 signal channels, featuring independent channel level control, independent channel level indicators, and independent channel outputs for sound recording.

Via a DB25 cable, multiple interpreter consoles can be connected to the control unit in a daisy-chain, and multiple control units can be cascaded together to transmit up to 16 audio channels in a system.

RF modulation: DSSS technology
Frequency band: 24002500 MHz
Frequency spacing: 5 MHz
Frequency response: 20Hz-20kHz
Distortion at 1 kHz: <0.5%
Channel separation: >70dB
RF output power level: 700mV
RF output impedance: 50 ohms
Input impedance: 18k ohms
Max. input power level: 3.5V
Signal-to-noise ratio: >75dB

Transmit power: 20mW~700mW
Power consumption: 60W
Powe supply: 110/220VAC, 50-60Hz
Operating voltage: 110-240V
Dimensions: 430Å~99Å~325 mm
Expansion port: DB25 connector
RF outputs: 2 or 4 N-connectors
Audio inputs: 2 or 4 RCA unbalanced
Audio outputs: 2 or 4 RCA unbalanced
Interpreter connector: DB25 female

RF Antenna Unit

TC-RFF02S/04S antenna unit is designed to be used for 2 or 4 operating channels, suitable for indoor installation only.

The TC-RFF01/02 high-gain directional antenna unit is designed for 1 or 2 operating channels, suitable for both indoor and outdoor applications.

Equipped with channel selection and channel locking function, the antenna unit is powered by the control unit via a coaxial feed cable. It can be positioned centrally in the conference venue or even in the control room, and can be mounted on wall, ceiling or tripod stand.

Signal Type: DSSS
Frequency band: 2400 - 2500 MHz
Frequency spacing: 5 MHz
Gain: 3 or 14 dBi
Impedance: 50 Ohms

Feed cable: SYV 50-3 or 7 coaxial
Connectors: N-type or SMA sockets
Cable length: 5 to 20 metres
Range: 50 to 200 metres
Polarization: vertical or horizontal

Digital RF Receiver

The portable TC-RFJ16 digital RF receiver is designed to be used for up to 16 audio channels, offering crystal-clear reception and CD-quality sound with sampling rate at 44.1kHz. The unit is powered by a more environment-friendly rechargeable Lithium-ion battery. The selected channel number, battery level and RF signal strength are shown on LCD screen. Equipped with individual wireless RF receivers, participants can listen to any selected language channel on a personal earphone, monitor the battery status, check whether or not the unit is receiving the signal properly, and adjust volume level for comfortable listening. Any number of receivers can be used in an installation.