 Thanks to its outstanding audio quality, the Listen LT-800 Stationary Transmitter can be used in a variety of applications. The LT-800 is connected to your main audio system, then broadcasts that high quality audio signal to belt pack receivers, stationary receivers, or wireless speaker/receivers.
The end result - your audience can hear you better because of better speaker placement or because they have their own belt pack and headset. Auditory assistance is aided by installing the transmitter with your facilities main audio system. Remote amplification can be achieved using the LT-800 and Listen's LR-100 Stationary Receiver/Power Amplifier or LR-600 Wireless Speaker Receiver.
The Listen LT-800 Stationary Transmitter is available in both the 72MHz and 216MHz frequency range. It broadcasts over 57 channels (40 narrowband & 17 wideband channels on the 72 MHz frequency band, and 19 wideband, 38 narrowband channels on the 216 MHz frequency band). This means you are sure to find a clear signal, or can use up to six Listen LT-800 Stationary Transmitters in the same area (often used for simultaneous interpretation) in the 72Mhz frequency (three in 216Mhz).
Language interpretation (including multiple simultaneous interpretations) can utilize a sound booth (a separated area or room where the interpreter can speak and not disturb the rest of the audience), and broadcast the interpretation with an LT-800 to individual receivers.
 The LT-800 also supplies two mixing audio inputs. Installation of the stationary transmitter can also be aided by a "test tone" transmitting from the unit.
The LT -800 can be rack mounted with other audio equipment, or set on a shelf. A complete line of antennas is also available from Listen.
If you have the need to take audio signal from one point to another, the LT-800 Stationary Transmitter can offer a solution for you.
The LT-800 carries a 90-Day Performance Guarantee and the Listen Limited Lifetime Warranty. | 
